Concrete steps construction in Bellevue NE - an entry that holds up to winter salt
Chipped, sinking or cracked front steps? We build new poured or precast concrete steps that sit solid at your door.
What's involved in replacing concrete steps in Bellevue?
Concrete steps construction in Bellevue, NE means taking out worn steps and putting in new ones, either poured on site into forms or cast ahead as one piece and set in place, and that choice decides how soon you can use your door again.
Most step calls start with something you see every time you walk in, like a chipped edge on the top tread, a landing that's pulled away from the house or a set that's settled enough to catch a toe. At Excel Bellevue Concrete Construction, the price on a new set mostly moves with how many steps you need, how wide the entry is, whether the old ones have to come out and whether you go poured or precast. The schedule turns on that same choice, plus the weather for a pour and any permit your address needs. You'll get your own figure once I've looked at the entry in person.
How we handle concrete steps construction
Before anything gets torn out, I lay out poured and precast steps side by side, because poured steps keep you waiting to use the door and precast steps don't. Then we talk about what the new steps will rest on and the mix, since entry steps take more de-icer than almost anything else at the house. On a poured job we break out and haul off the old steps, dig down to firm soil and pack the subgrade, the ground the steps sit on, so it doesn't settle away from the door. We set forms with a slight fall away from the house so water runs off the treads instead of pooling, and we place rebar, steel inside the concrete that holds it together if it cracks. We pour in the cooler part of the day so the top doesn't come out weak and dusty, cut control joints on a wide landing so any crack has a straight line to follow, and put a broom finish on the treads, a light texture that gives your shoes grip when they're wet. Then the steps cure, the wait while the concrete gains strength, before anyone uses them, and we clean up before we leave. On a precast job we prepare the base and set the unit level against the entry.
Steps often come with bigger work. When a project puts a door at a new floor height, like an addition built with slab foundation building, we set the steps from that floor down. On a new house we can plan the entry while we handle the foundation installation, so the step heights work out before anything is poured.
Why Bellevue homeowners call Excel Bellevue Concrete Construction for steps
I give every estimate myself
I come out to look at every job and give the estimate myself, and the work is done by me and a small crew I've trained. The person who measured your entry is the one setting the forms, so nothing gets lost between the visit and the pour.
Based in Bellevue since 2023
I started this business in Bellevue in 2023, and we work across Omaha and the cities around it, on both sides of the river. Steps around here see the same freezing, thawing and salt every winter, and that's what we plan the base and the mix around.
Licensed and fully insured, every job
We're licensed and fully insured. That way you're not the one carrying the risk if something goes wrong on your property while we work.
The base gets equal attention
When a budget gets tight, the base is usually the first thing people want to cut because nobody sees it, and I'd rather trim somewhere else. Steps sitting on loose fill tend to settle and pull away from the door, no matter how good the finish looked on day one.
Have the number of steps, the entry width and a few photos of the entry handy, then send us your project or call (402) 206-0944.
Get a free on-site estimate for new concrete steps
We'll get back to you within one business day, and the estimate is free with no obligation. After that, I come out to measure the entry, look at what's there now and give you the price in person, with poured and precast laid out side by side.
Concrete steps and entry work
Questions before you book concrete steps
How much do concrete steps cost in Bellevue, NE?
Installed poured concrete steps across the US usually cost about $200 to $500 per step, so the number of steps matters most. Where your job lands in that national range depends on the entry width, whether a landing is part of it and whether old steps have to be broken out first. I'll give you your own figure once I've seen the entry.
How do I choose between poured and precast concrete steps?
Choose precast if you can't be without the door, and poured if you want steps built to fit your entry and can live with the wait. Poured steps are formed and left to harden in place, while precast steps are cast ahead as one piece, and one precast maker says its steps can be used right away with no waiting on forms or curing. With poured steps, plan on that door being out of daily use until the concrete has cured.
What do precast concrete steps sit on?
One precast maker says its hollow steps can rest on concrete blocks, even on bare soil, though a poured pad under them may give excellent long-term support. Which base suits your entry is one of the things we go over at the estimate, before you pick a type.
What is the best concrete mix for outdoor steps that get de-icer?
Air-entrained concrete, which has tiny air bubbles mixed in on purpose, is the one to ask for, because it holds up better through freezing and thawing and scales less from de-icing chemicals. It can stand up to several hundred percent more freeze-thaw cycles than concrete without the air. Sarpy County's building rules rate the weathering risk for concrete here as severe, so on steps that get salted every winter, settle the mix before the pour.
Do I need a permit to build concrete steps in Bellevue?
Check with the city before work starts, because Bellevue issues a permit for each regulated structure built, repaired or removed, and its list of exempt work names replacing concrete walks but not steps. The city's building permit office also covers homes within two miles outside city limits and takes permit requests online. We find out which office covers your address, city or county, before we schedule, and when a permit applies, we take care of the application or walk you through it.
How do I check a concrete contractor in Nebraska?
Ask for the contractor's state registration number, because every contractor has to be registered with the Nebraska Department of Labor before doing construction work in the state. The department's contractor lookup shows who's registered and whether they carry workers' compensation, which any contractor with even one employee has to file. The department says registration isn't a promise of quality, so treat it as one check among several.
Other work that ties into your steps
- Slab foundation building
Building a garage, addition or sunroom on a new slab means a new door at a new height, and the steps there work best when planned with the slab itself.
- Foundation installation
Putting up a new house means every door needs a way in, and setting the entry heights while the foundation goes in saves fitting steps around surprises later.